Phoenix Flight Gear 100 amp/100a Heavy Duty Power Distribution Board
Our website is:
www.RC-Drones.com
Power 10 ESC’s, 2 Main Feeds and Accessories
For your 6S heavy lift build we recommend doubling up the power boards,
clamping together with M3 hardware then solder your power connections. (Below)
Description:
This board has 10 sets of positive and negative that will accept
pre-tinned 14awg wire and 2 sets of 12awg holes to feed main power to
the board. 12 sets of 22awg holes allow for any number of accessory
items to be attached or JST’s. Solder pads are pre-tinned for ease of
use and a stronger connection. 192 vias connect the conductors on both
sides of the board to improve current flow and allow the power board to
run cooler.
Specs:
Mounting: 45x45mm
Board size: 50x50mm
Amp rating: 100a
Conductor: 4oz copper
14awg hole diameter: 2.5mm
12awg hole diameter: 3.0mm
22awg hole diameter: 2.0mm
Weight: 9.5g